Technique dans la Construction. They pass the fire resistance test as per ENV 1187-1. Recommended uses PARALON PLUS FIRE membranes are ideal.

 

Certification PARALON PLUS ST FIRE membranes have obtained European Technical Approval formerly ICITE AgrŽment certification and have also.

 

FUSE PREP PLUS 1. PRODUCT DESCRIPTION Detergent for cleaning soil or surface oxides from weathered Sintofoil membranes. 2. SPECIFICATIONS - Density.

 

PRODOTTIIMPIEGO 1 Fondazioni EN 13707 EN 13859-1 del vapore EN 13969 EN 13970 A vista A giardino Sotto protezione Monostrato Pluristrato Pluristrato PARALON NT3 PLUS¥¥¥.

 

! , -. /0 /010 2 2 3 - 20 4 2 5 / 5/2 6 0 70 7 0 4 / - 2 8 / - 2 /9 : ; ! 7 7 / - 2 70 3 01 :: : 0 2 A : 01 : B:, - 5 -. 20 3 / PRODOTTI CAMPID IMPIEGO 1 Coperture EN 13707 Sottotegola EN 13859-1 Fondazioni EN 13969 A vista A giardino Sotto protezione pes

 

Product description Solvent borne bituminous primer for cementitious substrates. Recommended uses primer for cold- or hot-applied prefabricated waterproofing membranes.

 

Product description SBS modified bitumen polymer waterproofing membrane. TECNOFLEX Series prefabricated membranes include TECNOFLEX NT non-woven continuous filament.

 

ARWENOL AL Product description ARWENOL AL waterproofing membranes consist of a special bitumen and polymer-based compound co-extruded with a reinforced glass tissue.

 

Product description SBS modified bitumen polymer waterproofing membrane. PARAFLEX Series prefabricated membranes include PARAFLEX NT non-woven continuous filament.

 

SINTOPLENE SERIES Product description Prefabricated waterproofing membranes produced by co-extruding a bitumen-polymer based com- pound with a non-woven continuous.

 

Substrates and surface preparation Cementitious surfaces Clean and prime surfaces. Bitumen waterproofing and protective materials Clean, wash with water.

 

Product description Non-breathing prefabricated membrane produced by co-extruding a special vapor-tight bitumen-polymer compound. SCHERMO Series membranes are produced in two versions,.

 

10-10. 0 1 In compliance with applicable standards and AISPEC-MBP guidelines. 2 Typical for versions 20-15-10. 3 Typical for versions5. 4 Euroclass. SPECIFICATIONS 1 Properties standards.

 

ELASTOSINT PU Product description liquid applied polyurethane waterproofing membrane. Recommended uses Product can be applied to primed concrete, screed, flashing.

 

UNOSINT ANTIRADICE Product description Prefabricated waterproofing membrane for special applications. UNOSINT ANTIRADICE root resistant grade membranes are produced.

 

MONOPLENE SERIES Product description Prefabricated waterproofing membrane produced by co-extruding a bitumen-polymer based com- pound with a reinforced glass.

 

Product description Polyester reinforcing mat for protective coatings. Recommended uses Used together with resin coatings KOROLIT CHR, IMPERGUM.

 

Product description Water borne bituminous primer for cementitious substrates. Recommended uses WB Primer is designed specifically for use in waterproofing systems to block.

 

Product description Semi-rigid high-density polyethylene HDPE protective sheeting with densely cuspated surface forming a drainage core between.

 

Product description PARAGUM NT prefabricated waterproofing membranes are produced by co-extruding a bitumen-polymer based elasto- plastomeric compound with a non-woven continuous.

 

Product description Bitumen-polymer waterproofing membranes produced by co-extruding an elastomeric compound consisting of a disper- sion of SBS copolymers in selected distilled bitumens.

 

10-10 TRIPLENE SERIES continued 10/TRPL/I. 1. 1 In compliance with applicable standards and AISPEC-MBP guidelines. 2 -. 3 ±2 for glass tissue reinforcement. 4 Not determined, because.

 

Product description UNOSINT Series prefabricated membranes are produced by co-extruding a bitumen-polymer based compound with a non-woven continuous filament polyester.

 

UNOFIX 200 Product description Bitumen-polymer membrane for special applications. UNOFIX 200 prefabricated membrane is produced by bonding a bitumen-polymer compound with a non-woven.

 

Product description TOP Series prefabricated membranes obtained by coextrusion of polymer bitumen mix are available in two versions: TOP S, featuring a non-woven continuous filament polyester.

 

TEXTENEFLEX Product description TEXTENE FLEX Series waterproofing membranes are produced from a base compound co-extruded with a sized non-woven.

 

Product description Protective paint for bitumen-polymer waterproofing membranes. Recommended uses ELASTOMUL SB is recommended for coating and protecting bitumen membranes. Outstanding.

 

reinforcing mat consisting of non-woven polyester fabric stabilized with glass fiber, or reinforced glass tissue. Recommended uses ISO-ROLL MW is used.

 

Product description Perforated bitumen-polymer membrane with reinforced glass tissue mat for use as an intermediate ply in partially bond- ed built-up waterproofing applications. Upper.

 

Product description ELASTOMUL G is a flexible water-borne synthetic polymer base paint for protecting bitumen membranes from sunlight and atmospheric agents.

 

Product description Prefabricated membranes produced by extruding a special high-density vapor-tight bitumen-polymer compound. ADEVAPOR 35 membranes are available in three versions:.

 

03-13 10/ADTH/I. 1. Caution: Strictly adhere to the safety instructions provided on the label when using this product.

 

12 Notes 1 CONTENTS 1. INTENDED USE. 2 2. YOUR NEW BIOHIT MIDI PLUS. 2 3. UNPACKING AND PREPARING THE MIDI PLUS FOR USE 2 3. 1. Charging the Midi Plus. 3 3. 2. Low battery indicator.

 

PROTAPER PLUS Jesus Djalma Pйcora DDS, MSc, PhD, Professor and chairman, Department of Restorative Dentistry, School of Dentistry of Ribeirгo.