10-10 STAR continued 2 In compliance with applicable standards and AISPEC-MBP guidelines. 3 ±2 for glass tissue reinforcement. 4 Declared value or failure away.

 

Product description Insulation boards consisting of special high-density water-repellant glass fiber treated with a thermosetting resin-based binder. Boards.

 

Product description Rigid nonflammable pearlite foam insulation boards. Biologically inert, ERABOARD insulation boards do not emit gases or toxic.

 

Product description Expanded perlite insulation board with bituminous and cellulose binders, with high compressive strength and dimension- al stability.

 

Product description Prefabricated membranes designed to provide an effective barrier against radon gas intrusion. SICURBAR membranes are produced by co-extruding a special.

 

SILENTIUM Product description Thin, two-layer soundproofing floor underlayment consisting of a vibration damping polyester felt bonded to a sound absorbing.

 

10-10 ISO PUR continued 10/SP-ISO pur /I. 1. Note: ISO PUR insulation boards are designed for use in the range of temperatures normally encountered during service. They can withst and tem-.

 

Product description Solvent based colored and fibered waterproofing compound. Recommended uses ¥Renewing and rejuvenating waterproof covering materials in cold.

 

Product description Reducing agents for paint products. Recommended uses ¥DV 222 Used to thin chlorinated rubber based paints ¥DV 333 Used to thin.

 

Substrates and surface preparation Cementitious surfaces Clean and prime surfaces. Bitumen waterproofing and protective materials Clean, wash with water.

 

Product description Non-breathing prefabricated membrane produced by co-extruding a special vapor-tight bitumen-polymer compound. SCHERMO Series membranes are produced in two versions,.

 

Product description Prefabricated waterproofing membrane for applications requiring excellent mechanical strength, superior pliability and high tear and puncture resistance.

 

membraneÕs thickness and acting in total synergy with it. Recommended uses ISO-ROLL XPS/AE is used to waterproof and insulate pitched, flat, vaulted.

 

Technique dans la Construction. They pass the fire resistance test as per ENV 1187-1. Recommended uses PARALON PLUS FIRE membranes are ideal.

 

10-10. 0 1 In compliance with applicable standards and AISPEC-MBP guidelines. 2 Typical for versions 20-15-10. 3 Typical for versions5. 4 Euroclass. SPECIFICATIONS 1 Properties standards.

 

BITEXTENE S SERIES Product description BITEXTENE S Series waterproofing membranes are produced by co-extruding a specially formulated elastomeric com- pound consisting.

 

ELASTOSINT PU Product description liquid applied polyurethane waterproofing membrane. Recommended uses Product can be applied to primed concrete, screed, flashing.

 

ELASTOSINT PU PRIMER SB Product description solvent borne polyurethane primer. Recommended uses Surface treatment prior to using ELASTOSINT PU liquid.

 

UNOSINT ANTIRADICE Product description Prefabricated waterproofing membrane for special applications. UNOSINT ANTIRADICE root resistant grade membranes are produced.

 

10-10 10/ELPUTOPCOL/1. 0. Notes: 1 Minimum quantity needed to prepare surfaces. Quantity must be increased for rough or porous substrates, and as a result of the n ormal.

 

MONOPLENE SERIES Product description Prefabricated waterproofing membrane produced by co-extruding a bitumen-polymer based com- pound with a reinforced glass.

 

Product description Prefabricated waterproofing membranes for applications requiring excellent mechanical strength, superior pliability and high tear and puncture resistance.

 

Application and quantitative data Methods of application ¥Stiff bristle broom ¥Trowel ¥Squeegee Recommended number of coats ¥One coat for temporary.

 

Product description Polyester reinforcing mat for protective coatings. Recommended uses Used together with resin coatings KOROLIT CHR, IMPERGUM.

 

Product description Water borne bituminous primer for cementitious substrates. Recommended uses WB Primer is designed specifically for use in waterproofing systems to block.

 

Product description Semi-rigid high-density polyethylene HDPE protective sheeting with densely cuspated surface forming a drainage core between.

 

Product description PARAGUM NT prefabricated waterproofing membranes are produced by co-extruding a bitumen-polymer based elasto- plastomeric compound with a non-woven continuous.

 

10-10 PARAGUM ST continued 10/SP-PARAGUM ST /I. 1. Methods of application Waterproofing performance will depend to a significant extent on application methods. Substrates must.

 

Product description Bitumen-polymer waterproofing membranes produced by co-extruding an elastomeric compound consisting of a disper- sion of SBS copolymers in selected distilled bitumens.

 

Certification PARALON PLUS ST FIRE membranes have obtained European Technical Approval formerly ICITE AgrŽment certification and have also.

 

10-10 TRIPLENE SERIES continued 10/TRPL/I. 1. 1 In compliance with applicable standards and AISPEC-MBP guidelines. 2 -. 3 ±2 for glass tissue reinforcement. 4 Not determined, because.

 

Product description UNOSINT Series prefabricated membranes are produced by co-extruding a bitumen-polymer based compound with a non-woven continuous filament polyester.

 

UNOFIX 200 Product description Bitumen-polymer membrane for special applications. UNOFIX 200 prefabricated membrane is produced by bonding a bitumen-polymer compound with a non-woven.

 

Product description Solvent borne modified bitumen base primer. Recommended uses Priming before application of bituminous products in general.

 

Product description TOP Series prefabricated membranes obtained by coextrusion of polymer bitumen mix are available in two versions: TOP S, featuring a non-woven continuous filament polyester.

 

TEXTENEFLEX Product description TEXTENE FLEX Series waterproofing membranes are produced from a base compound co-extruded with a sized non-woven.

 

Product description Protective paint for bitumen-polymer waterproofing membranes. Recommended uses ELASTOMUL SB is recommended for coating and protecting bitumen membranes. Outstanding.

 

reinforcing mat consisting of non-woven polyester fabric stabilized with glass fiber, or reinforced glass tissue. Recommended uses ISO-ROLL MW is used.

 

Product description Metallizing paint for bitumen surfaces. Recommended uses metallizing treatment for waterproof bitumen roofing. ¥ALLABIT 822 Aluminum improves.