Pressure Gauges Service intended Pressure gauge testing and calibration. Suitable for all gaseous and liquid media that will not obstruct the pressure.

 

SOUTHWEST RESEARCH INSTITUTE® SAN ANTONIO HOUSTON DETROIT WASHINGTON,DC TEST REPORT Calibration of a Fox Thermal Instruments,Inc 4-Inch ThermalMass Flow Meter.

 

Mirror Removal: Use the dome crane and spreader bar to lift the secondary assembly off of the storage cage and roll the cage out of the way. Lower the secondary assembly down.

 

120 Inch Telescope Secondary Removal FILENAME 120 Inch Telescope Secondary Removal. doc x:xmpmeta xmlns:x adobe:ns:meta/ rdf:RDF xmlns:rdf http://www. w3. rdf:Description.

 

120 Inch Telescope Primary Washing lescope Primary Mirror Washing. doc 1120 Ǝ Primary Mirror Washing Introduction: The120Ǝ primary should.

 

120 Inch Mirror Washing Report SPECULAR TOTAL DELTA scatter 400-540 82. 0 88. 8 6. 8 480-600 82. 0 88. 6 6. 6 590-720 81. 4 88. 0 6. 6 900-1100 88. 0 94. 2 6. 2 120 Inch Telescope Mirror Washing.

 

120! Coude Secondary Coating Preparation 120 inch Coude Secondary Coating Preparation. doc 1 Introduction: The Coude secondary has well known glass.

 

While the mechanical team was removing the mirror we prepared a workspace on the mezzanine by laying down a sheet of plastic in an out-of the way space. We mixed up chemicals.

 

Mirror Removal: Use the dome crane and spreader bar to lift the secondary assembly off of the storage cage and roll the cage out of the way. Lower the secondary assembly down.

 

3-METER PRIMARY MIRROR BEFORE AND AFTER WASHING William E. Brown September 11, 2009 On August 31, 2009, the Shane telescope’s 3-meter primary.

 

120 Inch Telescope Primary Recoating February 13 – 16, 2006 Day1 While the mechanical team was removing the mirror we prepared a workspace on the mezzanine by laying.

 

120! Coude Secondary Coating Preparation 120 inch Coude Secondary Coating Preparation. doc 1 Introduction: The Coude secondary has well known glass.

 

Mirror Removal: Use the dome crane and spreader bar to lift the secondary assembly off of the storage cage and roll the cage out of the way. Lower the secondary assembly down.

 

120 Inch Telescope3rd Mirror Removal 120 Inch Telescope 3rd Mirror Removal. doc 1.

 

120 Inch Telescope After soap wash, another rinse with tap water, then the surface is partially dried using lab Kaydrys, gently.

 

120 Inch Telescope Secondary Removal FILENAME 120 Inch Telescope Secondary Removal. doc x:xmpmeta xmlns:x adobe:ns:meta/ rdf:RDF xmlns:rdf http://www. w3. rdf:Description.

 

120 Inch Telescope Coude Secondary Surface Report 120 Inch Telescope Coude Secondary Surface Report. doc 1.

 

120 Inch Telescope5th Mirror Removal 120 Inch Telescope 5th Mirror Removal. doc 1.

 

120! Coude Secondary Coating Preparation 120 inch Coude Secondary Coating Preparation. doc 1 Introduction: The Coude secondary has well known glass.

 

120 Inch Telescope Coude Secondary Surface Report FILENAME 120 Inch Telescope Coude Secondary Surface Report. doc x:xmpmeta xmlns:x adobe:ns:meta/.

 

120 Inch Telescope 5th Mirror Removal FILENAME 120 Inch Telescope 5th Mirror Removal. doc.

 

Corrected Copy 2-7-06 FIRST DAY Do in advance if possible. 1. Remove Cassegrain spectrograph and store by main console. 1 2. Move coude third mirror.

 

120 Inch Telescope Coude ′ Secondary Mirror Coating Process July 9, 2002 120 Inch Telescope Coude Coating Process. doc 1 The Coude secondary.

 

120 Inch Telescope 3rd Mirror Removal FILENAME 120 Inch Telescope 3rd Mirror Removal. doc.

 

120 Inch Telescope aluminizing Procedure changes 120 Inch Telescope Primary Coa ting Bill Brown Improvements. doc 1 Bill Brown’s List of Suggested.

 

120 Inch Telescope Primary Aluminizing Procedure Corrected Copy 2-7-06 FIRSTDAY CREW: 9 - 9 hours Do in advance if possible. 1. Remove Cassegrain spectrograph.

 

rtf1 ansi ansicpg1252 uc1 deff0 stshfdbch0 stshfloch0 stshfhich0 stshfbi0 deflang1033 deflangfe1033 fonttbl f0 froman fcharset0 fprq2 panose Times.

 

Setting Up: A couple of days ahead of time you should gather your supplies for the washing to make sure you have what you need to complete.

 

120 Inch Telescope Coude Secondary Surface Report FILENAME 120 Inch Telescope Coude Secondary Surface Report. doc x:xmpmeta xmlns:x adobe:ns:meta/.

 

120 Inch Telescope After soap wash, another rinse with tap water, then the surface is partially dried using lab Kaydrys, gently.

 

Setting Up: A couple of days ahead of time you should gather your supplies for the washing to make sure you have what you need to complete.

 

rtf1 ansi ansicpg1252 uc1 deff0 stshfdbch0 stshfloch0 stshfhich0 stshfbi0 deflang1033 deflangfe1033 fonttbl f0 froman fcharset0 fprq2 panose Times.

 

While the mechanical team was removing the mirror we prepared a workspace on the mezzanine by laying down a sheet of plastic in an out-of the way space. We mixed up chemicals.

 

3-METER PRIMARY MIRROR BEFORE AND AFTER WASHING William E. Brown September 11, 2009 On August 31, 2009, the Shane telescope’s 3-meter primary.

 

Corrected Copy 2-7-06 FIRST DAY Do in advance if possible. 1. Remove Cassegrain spectrograph and store by main console. 1 2. Move coude third mirror.

 

120 Inch Telescope Primary Aluminizing Procedure Corrected Copy 2-7-06 FIRSTDAY CREW: 9 - 9 hours Do in advance if possible. 1. Remove Cassegrain spectrograph.

 

40 Inch Telescope Primary Mirror Removal FILENAME 40 Inch Telescope Primary Removal. doc.

 

40 Inch Telescope Primary Mirror Removal 40 Inch Telescope Primary Removal. doc 1 Old Way Using Crane.

 

Ladder is located in the Mainbuilding attic. 36 Inch Telescope Observation Ladder FILENAME 36 Inch Telescope Observation Ladder. doc 8.

 

36 Inch Telescope Floor Hydraulic Fluid Subject: Mt Ham 36 Hydraulic System Date: Fri, 7 May 2004 10:51:17 -0700 From xblun; xk uc; xsc. e; xdu00;:.

 

Date: Fri, 7 May 2004 10:51:17 -0700 From: Dan Blunk blunk ucsc. edu To: Surfcrowe aol. com CC: shankle ucolick. org Steve, I’m sending you some background.

 

36 Inch Telescope Observation Ladder 36 Inch Telescope Observation Ladder. doc 1 Pictographic images for reassembling the 36” observation ladder. Ladder is located in the Mainbuilding.

 

36 Inch Telescope Floor Hydraulic Fluid.

 

There has been talk over the years about lowering the floor of the 36 inch telescope to the level of the lower outer floor ring. This.

 

36 Inch Telescope Floor Hydraulic Fluid.